Specialists in Industrial Acoustic Engineering

1A Container
1B Container
1C Container
1D Container
1E Container
1F Container
1G Container

2A Container
2B Container
2C Container
2D Container Chloride
2E Container
2F Container
2G Container

3A Container
3B Container
3C Container
3D Container
3E Container
3F Container
3G Container


Where there is a need to provide a self contained working environment Sound Engineering Ltd offers a container designed to meet the individual needs of the customer.

Containers have a steel checker plate floor with RSC cross members extending to ground level and forming a spillage bund, the base is supplied with lifting lugs which can be used for transport purposes.There are 16mm fixing holes down both sides. 2 skid plates are fitted to the checker plate and a sump pocket positioned where required

The sides are smooth or corrugated and lined with 0.7mm perforated pre galvanised sheet panels. The infill is acoustic quality high-density non-hydroscopic mineral wool.

A access door is included in each side incorporating the necessary strengthening to accept the heavy duty door furniture. Each door incorporates an acoustic seal, which compresses on closing to maintain the acoustic integrity.

Air enters and leaves the enclosure through the weather louvres and attenuators. The radiator fan coupled to the discharge attenuator via a canvas connection prevents re-circulation and ensures a positive flow of air through the enclosure.

The exhaust system is a double chamber design, providing for initial low restriction expansion, followed by adequate attenuation of the higher frequency exhaust noise, this is followed by an absorption silencer and tailpipe. If required the exhaust can be mounted inside and thermally insulated.

The enclosure is given a coat of high build primer and finished with 2 top coats from BS 4800, BS381C or RAL range of colours


© Sound Engineering Ltd, Ashford, UK, TN24 8DH Website Design by Arts Inc Design Website Hosting, CMS and Programming by Goldhosts